adhesive foil "Schwalbe" writing

Piping for headlamp / fuel tank - PVC black - 650mm - cutted 700mm - SR4-2, SR4-3, SR4-4

Piping for headlamp / fuel tank - PVC grey - 650mm - cutted 700mm - SR4-2, SR4-3, SR4-4

Rear reflector complete KR 51 const. year 64-66 AWO BMW

Rear reflector complete KR 51 const. year 64-66 AWO BMW black

Rear reflector complete KR 51 const. year 64-66 AWO BMW grey

Rear reflector housing KR 51 const. year 64-66 AWO BMW

Set rubber underlayer for rear reflector 64 until 66 KR51

Engine tunnel - primed - possibly storage marks - for Schwalbe KR51

CatalogueNo.: 1

Clamping nut M6 - star head - beige - with compressuring disc - for engine cover and hood SR50, SR80, KR50, KR51, all SR4-types

CatalogueNo.: 2

Clamping nut M6 - star head - black - for engine cover and hood - without pressure disc (MZA 10447)

SR50, SR80, KR50, KR51, all SR4-types
CatalogueNo.: 2

Clamping nut M6 - star head - black - long version - without pressure disc (10447) - MZ ES, MZ TS - & SIMSON

CatalogueNo.: 2

Clamping nut M6 - star head - black - with compression disc - for engine cover and hood

CatalogueNo.: 2, 3

Clamping nut M6 - star head - black - without compression disc (10447) - for engine cover and hood

CatalogueNo.: 2

Clamping nut M6 - star head - black - without pressure disc - for engine cover and hood

CatalogueNo.: 2

Clamping nut M6 - star head - cream - long version - without pressure disc (10447) - MZ ES, MZ TS - & SIMSON

CatalogueNo.: 2, 3

Clamping nut M6 - star head - grey - with compressuring disc - for engine cover and hood SR50, SR80, KR50, KR51, all SR4-types

CatalogueNo.: 2

Clamping nut M6 - star head - ivory (beige) for engine cover and hood

CatalogueNo.: 2

Knurled nut M6 - Aluminium - KR51, SR4-1, SR4-2

CatalogueNo.: 2, 3

SET Clamping nut M6 - star head - black - long version - with pressure disc - MZ ES, MZ TS - & SIMSON

CatalogueNo.: 2

Comression disc for clamping nut M6 - star head

CatalogueNo.: 3

Angle for seat bench (lock) - galvanized - KR51

CatalogueNo.: 4

Angle for seat bench (lock) - galvanized - KR51

The parts have been sandblasted, galvanized and zinc-coated, yellow.
Attention - example picture, you will not get the part on display!
CatalogueNo.: 4

Base plate for seat bench KR 51/1 and SR 4-2 short version

with mounting for air pump
CatalogueNo.: 4

Hinge - SET seat bench - Schwalbe (hinge, angle, screws)

CatalogueNo.: 4

Hinge - SET seat bench - SR4 models with small parts

CatalogueNo.: 4

Hinge for seat bench, KR51, bird series, wide version

CatalogueNo.: 4

Hinge for seat lock, KR51, bird series

CatalogueNo.: 4

Protection cover for double seat

CatalogueNo.: 4

Seat bench cushion KR51/1, SR4-2, pointed version

CatalogueNo.: 4

Seat bench cushion KR51/1, SR4-2, short version

CatalogueNo.: 4

Seat bench Simson complete (smooth black KR51/2, without small parts)

CatalogueNo.: 4

Seat cover SIMSON, black, smooth KR51/1, Star

CatalogueNo.: 4

Seat cover, KR51/1, SR4-2 - for short seatbench - black (no writing)

CatalogueNo.: 4

Seat cover, SIMSON - light grey, smooth KR51/1, SR4-2 Star - for short seatbench-

CatalogueNo.: 4

Seat cover, slip cover - black - KR51/1, SR4-2 Star - for short seatbench-

CatalogueNo.: 4

Seat cover, slip cover - brown - KR51/1, SR4-2 Star - for short seatbench-

CatalogueNo.: 4

Curved disc spring B6 TGL 0-137

For Mfa SL1 picture number: 8, 11, 19, 22 and 26
CatalogueNo.: 5

Curved disc spring B6 TGL 0-137, chromed

For Mfa SL1 picture number: 8, 11, 19, 22 and 26
CatalogueNo.: 5

Spring washer DIN 137-B6-FSt-A4R

CatalogueNo.: 5

Hexagon screw M6x10 933

CatalogueNo.: 6

Hexagon screw M6x10 TGL 0-933-8.8

Original ESKA
CatalogueNo.: 6

Hexagon screw M6x10 TGL 0-933-8.8, old version with full head

Original ESKA
CatalogueNo.: 6

Rubber buffer for seat bench Schwalbe

Schwalbe KR51, SR4-1, SR4-2, SR4-3, SR4-4
CatalogueNo.: 7

Rubber damper for seat (small)

KR50, KR51, S53, S83, SR50, SR80
CatalogueNo.: 7

SET Rubber buffers for seat bench

Schwalbe KR51, SR4-1, SR4-2, SR4-3, SR4-4
CatalogueNo.: 7

Hook, for luggage carrier strap Simson and MZ

CatalogueNo.: 8

Latch for luggage carrier strap - old version

CatalogueNo.: 8

Strap hanger for seat, black,

CatalogueNo.: 9

Strap hanger for seat, black,

CatalogueNo.: 9

Hook, loose for luggage carrier strap S51, KR51

CatalogueNo.: 10

Hook, loose for luggage carrier strap S51, KR51

CatalogueNo.: 10

Luggage carrier strap

Attention!
The material of this article reaches its longest service life when it does not come into contact with petrol and oil!
Please only clean this rubber part with water!
CatalogueNo.: 10

Luggage carrier strap complete - 1 hook + 1 clamp latch - luggage carrier SIMSON - old version

CatalogueNo.: 10

Luggage carrier strap with hook and latch - luggage carrier SIMSON and MZ (single latch oderno: 11105)

CatalogueNo.: 10

Skirting board - SET - right/left - Aluminium - for engine tunnel - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left - chromed - with piping and rivets - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left - Steel chromed - for engine tunnel - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left - Steel galvanized - for engine tunnel - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left - Steel galvanized - for engine tunnel - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left -ALU - with piping and rivets - Schwalbe KR51

CatalogueNo.: 11-15

Skirting board - SET - right/left -shiny galvanized - with piping and rivets - Schwalbe KR51

CatalogueNo.: 11-15

SET 5x Solid rivets 4x6-Al (DIN 660) - baseboard engine tunnel KR51

CatalogueNo.: 12

Solid rivet 4x6 Alu (DIN 660)

CatalogueNo.: 12

Welting / piping for right engine tunnel KR51/1

CatalogueNo.: 14

Welting / piping for left engine tunnel KR51/1

CatalogueNo.: 15

Rubber string - piping - black 775mm long - KR51

CatalogueNo.: 16

Rubber string for hood - piping - black 285mm long - KR51

CatalogueNo.: 16

Welting / Piping for front plate and hole edging, black KR51 (total length 1,10)

Order by metre!
CatalogueNo.: 17

Welting / piping for front plate and hole edging, grey KR51 (total length 1,10)

CatalogueNo.: 17

Hexagon screw M8x16 TGL 0-933-8.8

Original ESKA
CatalogueNo.: 18

Hexagon screw M8x16 TGL 0-933-8.8, DIN 933

CatalogueNo.: 18

Spring washer B8 TGL 0-137

S51 upper right side suspension strut
For old rear footrests 3931026005 and 3931025005 which are replaced by the above mentioned rear footrest sets.
CatalogueNo.: 19

Lifting handle - chromed SCHWALBE KR51/1, KR51/2, SR4-2, Star

CatalogueNo.: 20

Lifting handle - chromed SCHWALBE KR51/1, KR51/2, SR4-2, Star

CatalogueNo.: 20

Lifting handle on luggage carrier - stainless steel KR51/1, KR51/2, SR4-2

CatalogueNo.: 20

SET attachments for luggage carrier with lifting handle for KR51 - black distance pieces

CatalogueNo.: 20

SET attachments for luggage carrier with lifting handle for KR51 - grey distance pieces

CatalogueNo.: 20

SET attachments for luggage carrier with lifting handle for KR51 - grey distance pieces

CatalogueNo.: 20

Luggage carrier - chromed - rubber ivory

CatalogueNo.: 22

Luggage carrier. chromed complete, grey rubber - with hook (old version) - birdseries

CatalogueNo.: 22

Luggage carrier. chromed, black rubber - with hook (new version) - Birdseries

CatalogueNo.: 22

Hexagon screw M6x40 931 TGL 0-931-8.8

CatalogueNo.: 23

Distance piece for luggage carrier (intermediate piece) all KR51

CatalogueNo.: 24

Distance piece for luggage carrier - grey (intermediate piece) - all KR51, SR4-2, SR4-3, SR4-4

CatalogueNo.: 24

Distance piece for luggage carrier - ivory (intermediate layer)

KR51, SR4-2, SR4-3, SR4-4
CatalogueNo.: 24

Toothed lock washer 6,4 (DIN 6797-E4J) TGL 6797 6,6x11-0,7

CatalogueNo.: 26

Hexagon nut M6 TGL 0-934-6

CatalogueNo.: 27

Hexagon nut M6 TGL 0-934-6

Original ESKA
CatalogueNo.: 27

Hexagon nut M6 TGL 0-934-6

Original ESKA
CatalogueNo.: 27

Left hood part - raw part for repair

CatalogueNo.: 28

Washer 6,4 TGL 0-9021 St

(S51, S50, S61, S53, S70 does not apply if mudguard reinforcement is used 1x)
for SD50 only for container Zarges
CatalogueNo.: 29

Spacer tube, short for fuel tank fastening S50,S51,S70 // pillion foot pegs - hood KR51

CatalogueNo.: 30

Spacer tube, short for fuel tank fastening S50,S51,S70 8,1x11,3x9 mm

CatalogueNo.: 30

Buffer washer Ø 22x11,5x6 mm - material EPDM 65 Shore - engine bearing front SR50/80 - pillion foot rest - hood Schwalbe KR51

CatalogueNo.: 31

Pair - Shell - KR51 hood / pillion foot rest - internal Ø 8,8 mm, external Ø 26 mm

CatalogueNo.: 32

Shell - KR51 hood / pillion foot rest - internal Ø8,8mm, outer 26 Ømm

CatalogueNo.: 32

SET pillion footrests (crosswise ribbing) - old version - shiny galvanized S50, S51, S53, S70, S83 , KR51, SR4

CatalogueNo.: 33

SET pillion footrests - new version - galvanized

CatalogueNo.: 33

SET pillion footrests B TGL 39-290 (left and right) galvanized, smooth black Simson

CatalogueNo.: 33

Cap for taillight, square, red, complete - 8522.13-200 - KR51/1, SR4-1, SR4-2, SR4-3, SR4-4

CatalogueNo.: 35

Cylinder screw M6x18 (DIN 84)

CatalogueNo.: 35

Flat gasket for taillight and brake light - birdseries

CatalogueNo.: 35

Gasket for lens for stop & tail lamp, angled (lens 8522.13-200)(Also suitable for tail lamp Ø100mm - 10163)

KR51/1, SR4-2, -3, -4
CatalogueNo.: 35

Hexagon screw M8x25 (DIN 933)

(S51, S70, SR50, SR80 - can be used for upper clamping device as well)
CatalogueNo.: 35

Hexagon screw M8x25 (DIN 933)

Original ESKA
(S51, S70, SR50, SR80 - can be used for upper clamping device as well)
CatalogueNo.: 35

Hexagon screw M8x25 (DIN 933)

Original ESKA
(S51, S70, SR50, SR80 - can be used for upper clamping device as well)
CatalogueNo.: 35

Housing (sheet metal body) for square taillight - bird series

CatalogueNo.: 35

Lens for stop and tail lamp 8522.21-200, ø 120 mm - red - 3 screws

with E testmark
CatalogueNo.: 35

Lens for stop and tail lamp Ø 120mm - red - 3 screws - 8520.26-200 - without 3 pan-head, self-tapping screw

with E testmark
CatalogueNo.: 35

Rubber gasket. O-Ring Ø 95x3,5mm, for taillight Ø100mm

CatalogueNo.: 35

Tail light, brkae light, complete, 2-screws - BSL 8522.11/1 - ø100 mm

Produced from original drawings with lables - without light sources - 2-screw-tail light with E-test mark and metalic housing
CatalogueNo.: 35

Taillight, brake light, red lens - BSKL 8522.13/1 - KR51/1, SR4-1, SR4-2, SR4-3, SR4-4

CatalogueNo.: 35

Bifurcated rivet - nickel plated - 3,7x11 for SR2, SR2E

Bifurcated rivet - nickel plated - 3,7x14,5 for SR2, SR2E

Bifurcated rivet - nickel plated - 3,7x14,5 for SR2, SR2E

Bifurcated rivet 3,7x13 SR2, SR2E such as fastening the Simson company sign on seat/saddle

Disc washer 4-ST-E4J - nickel plated - push pad, safety plate - 4x12 - 0,6