Repair set BVF Jet needle / partial load 04

Repair set BVF jets 16N1-6

Repair set BVF plunger for 16N3, 16N1, 19N

Repair set float BVF for 16N3, 16N1, 19N

SET jets BVF - fine adjustment - SIMSON 0,72-0,80 - 7x main jets

Mixing chamber cap BVF (16N1 wihtout thread)

CatalogueNo.: 1

Mixing chamber cap BVF (16N1 wihtout thread)

CatalogueNo.: 1

Mixing chamber cap BVF 16N1 (complete with scew and nut)

CatalogueNo.: 1

Mixing chamber cap BVF 16N1 (with thread)

CatalogueNo.: 1

Pressure spring BVF for throttle valve, softer version

CatalogueNo.: 2

Pressure spring for throttle valve BVF

CatalogueNo.: 2

Throttle valve BVF 16N1

CatalogueNo.: 3

Needle clip for carburetor BVF 16N1

CatalogueNo.: 4

Jet needle / partial load 04

SR1, SR2
CatalogueNo.: 5

Jet needle / partial load BVF 04

CatalogueNo.: 5

Jet needle / partial load BVF 04-1 (Simson)

CatalogueNo.: 5

Adjusting screw BVF for slide stop 16N1

CatalogueNo.: 6

Pressure spring BVF 16N1 - for check screw orderno: 10633

CatalogueNo.: 7

Air adjusting screw 0013 BVF - M 5210 ETZ 250

CatalogueNo.: 8

Air adjusting screw 0013 BVF - M 5210 ETZ 250

CatalogueNo.: 8

Compression spring for stop screw 0011 BVF 30 N 2-5 ETZ 250

CatalogueNo.: 9

Pressure spring for mixture regulation 0011 BVF 30 N 2-5 ETZ 250

CatalogueNo.: 9

Seal ring Copper 10x14 TGL 0-7603

CatalogueNo.: 11

Sealing washer A10x14x1,5-Al (DIN 7603)

CatalogueNo.: 11

BVF - Float (SIMSON)

CatalogueNo.: 12

BVF - Float (SIMSON)

CatalogueNo.: 12

Dowel pin 2x20mm f. float

CatalogueNo.: 14

Idling jet BVF 40

CatalogueNo.: 15

Needle jet BVF 16N1-12/215 (4x60)

KR51/2N,E,L, Star
CatalogueNo.: 16

Jet BVF M5 (50)

CatalogueNo.: 17, 32

Mainjet BVF 55 - M5

CatalogueNo.: 17, 32

Gasket for floating chamber - gasoline resistant BVF

CatalogueNo.: 18

Gasket for floating chamber - BVF carburetor

Brand: PLASTANZA / Material ABIL
CatalogueNo.: 18

Gasket for floating chamber Long-Life (Rubber cork) BVF

CatalogueNo.: 18

Cylinder screw M4x16 TGL 0-84-4.8

CatalogueNo.: 19

BVF - Float chamber (SIMSON)

CatalogueNo.: 20

BVF - Float chamber (SIMSON) - transparent

- transparent carburetor pan
- Material: plastic
- After a longer period of use, the plastic may become slightly milky
- we recommend using the carburetor tray only to adjust the float level
- the tub should be drained if it is left standing for a longer period
- the two screws should be tightened gently
- fits for BVF 16N, 19N, 21N carburetors
CatalogueNo.: 20

Float camber with locking screw + gasket for BVF Carvuretor 16N1, 16N3, 19N1, 21N1

CatalogueNo.: 20

Float camber without locking screw for BVF Carvuretor 16N1, 16N3, 19N1, 21N1

CatalogueNo.: 20

Float chamber with switch mode NJ 215 for 16N, 19N & 21N

1x float chamber for 16N 19N 21N with main jet switch function
1x jet holder with switch function for float chamber with switch function 215
1x gasket for floating chamber black TPU for 16N 19N 21N
CatalogueNo.: 20

Float chamber with switch mode NJ 265 for 16N, 19N & 21N

1x float chamber for 16N 19N 21N with main jet switch function
1x jet holder with switch function for float chamber with switch function 265
1x gasket for floating chamber black TPU for 16N 19N 21N
CatalogueNo.: 20

Sealing ring 14x18 TGL 0-7603 Auminium

CatalogueNo.: 21

Sealing ring A14x18x1,5, copper DIN 7603

CatalogueNo.: 21

Float needle valve compl. BVF 15

CatalogueNo.: 25

Valve body BVF

CatalogueNo.: 25

Adjuster screw BVF with nut (long for starter cable)

CatalogueNo.: 26, 27

Adjuster screw BVF with nut (short for gas cable)

CatalogueNo.: 26, 27

Hexagon nut M6x0,75 BVF - N 3632- St.

CatalogueNo.: 27

Starting device cover

CatalogueNo.: 28

Starting device cover BVF

CatalogueNo.: 28

Starting device, short, for BVF carburetor, manual release - fully assembled

- was also installed in the Tümmler boat engine -
CatalogueNo.: 28

Starting device, short, for BVF carburetor, manual release - individual parts

- was also installed in the Tümmler boat engine -
CatalogueNo.: 28

Pressure spring 2903 BVF for plunger

CatalogueNo.: 29

Plunger 2905 for BVF carburettor (Simson & MZ) (rubber for plunger included)

Simson+MZ
CatalogueNo.: 30, 31

Rubber plate for plunger 2906 BVF carburettor

CatalogueNo.: 31