Zahnrad f. 1. Gang 34 Zähne

Andere Zähnezahl, vermutlich Geländesport oder Rennsport

Manufacturer: MZ - VEB Motorradwerk Zschopau, Neue Marienberger Straße 189c, DDR-9360 Zschopau, Telefon: Zschopau 440, Fernschreiber: 07427

Air flow plate with clap, came with Barkas stationary engine parts

Air flow plate, came with Barkas stationary engine parts

Aluminium disk, came with Barkas stationary engine parts

external approx. 120mm
internal approx. 18mm
6x holes approx. 7,5mm, hole circle approx. 42mm

Brake anchor plate, front with linings approx. 126 Original NEW

with support for speedometer drive
This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Brake lever right hand side, brake disc

Cable harness dimmer switch => lamp

white
white/black
yellow

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Cable harness handlebar switch => lamp

brown with ring
brown
black
black/blue
black/green
black/grey

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Cable harness turn signal switch => lamp => turn signal

black/green
black/white
black on blue/black

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Closure part

Contactscrew for brake light M5

Cover plate for theft protection

Flexible hose / hydraulic hose VEB Hydrauflex - whole legnth 410mm, NW4, 4MPa

2x union nuts spanner gap 14 with thread M12x1,5mm

Foot rest, right hand side short

Gasket

internally: 39mm
3x holes for M5

Gasket Kautasit

internally: 52mm
4x holes for M6
1x hole 3.7mm

Headlamp H4, asymmetric, right hand side

Headlight H4 complete (right asymmetric)

Manufacturer: FER - VEB Kombinat Fahrzeugelektrik Karl-Marx-Stadt, Paul-Gruner-Straße 52, DDR-9010 Karl-Marx-Stadt

Locking plate

Manufacturer: DOBLINA - VEB Döbelner Beschläge- und Metallwerk, Belojannisstraße 31, 7300 Döbeln DDR

Locking plate burnished with nose inside

internally: 22,90mm
outside: 40mm

Locking plate galvanized with nose inside

internally: 18.50mm
outside: 33mm

Pinion 14 teeth with cone

Cone approx. 13.3/14.4mm
Pinion approx. 5.3mm
Total about 15mm

Piston ring 67,00x2,5

Spring force excentric

Piston ring 67,25x2,5

Spring force excentric

Piston ring 67,50x2,5

Spring force excentric

Piston ring 67,75x2,5

Spring force excentric

Piston ring 68,25x2,5

Spring force excentric

Piston ring 68,75x2,5

Spring force excentric

Piston ring 69,25x2,5

Spring force excentric

Piston ring 69,50x2,5

Spring force excentric

Piston ring 70,50x2 for countersunk locking pin

GDR old stock

Pressure spring Dell´ Orto carburetor?

Rear reflector -Hella- white with glue

Rear reflector 200 482 801

Rotax Aluinium disc with two parallel holes

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Rotax Aluminium ring M6?

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Rotax cylinder head gasket

Rotax O-ring

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Rubber sleeve for ignition cable - water protection cap

Rubber sleeve for ignition cable - water protection cap

Rubber sleeve for ignition cable - water protection cap

Shim washer

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Shim washer 40x46x0,1

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Shim washer 40x46x0,3

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Spacing washer 24,1x34x2

Torsion spring, came with Barkas stationary engine parts

This item is on stock, but we do not exactly know what it's for. We kindly ask for your help and will, of course, return the favor.

Wrench socket for spanner gap 12