Assembly hook for dismantling and assembling of springs, for span, mounting - cranked end

Bactofin - fuel stabilizer 100ml

CatalogueNo.: o.Abb.

Bowl for small parts Ø150mm - magnetic, stainless steel, base rubberized - ideal for screws, nutes small parts, working on carburetor ect.

Chain breaker universal - for 420 - 530 chain division

Cleaner MARSTON for sealing surfaces (special remover for old gaskets) can 250ml

Dial gauge for ignition point settings, settings clock for contact breaker ignition - for spark plug tread M14x1,25

GDR face shield for children, without rubber, bicylce Simson

VEB Rathenower Optische Werke "Hermann Duncker" (Publicly Owned Operation - Rathenower optical factory "Hermann Duncker")

GDR face shield for children, yellow tinted, bicylce Simson

VEB Rathenower Optische Werke "Hermann Duncker" (Publicly Owned Operation - Rathenower optical factory

Lashing strap, tensioning belt, lashing belt - self-clamping - 2,5 m x 25 mm

MD-Sil red

permanently elastic silicone sealant
dispenser 200ml, red, 300°C (Hylosil red)

MZ/IWL/Simson special tool, pressure bolt for clutch spring, galvanized

Our own repro, German production.

Safety lock - cylinder lock with 2 keys

Screw lock - high strength - 10ml for threads til M20

Screw lock - middle strength - 10ml for threads til M36

Sealing compound Curil T2 - 70ml dosage tube - liquid seal until up to +270°C

Sealing compound HYLOMAR M - permanently elastic - universal usability (permanently deployable up to 250°C, resistant to oil, petrol, water etc) 80ml tube incl. dosage grommet

SET stamped figures A-Z - punch-type letters - Letter height: 3,0mm - writing characteristics to DIN 1451

SET stamped figures A-Z - punch-type letters - Letter height: 4,0mm - writing characteristics to DIN 1451

SET stamped figures A-Z - punch-type letters - Letter height: 5,0mm - writing characteristics to DIN 1451

Spraycan top coat LEIFALIT (Premium) olive green for SR4-4, KR51/1S 400ml

Hexagon screw M8x10-A4K (DIN 933)

Original ESKA
CatalogueNo.: 2

Hexagon screw M8x10-A4K DIN 933

CatalogueNo.: 2

Plain washer 8,4 TGL 0-125 St

CatalogueNo.: 3

Buffer washer Ø8x22x6mm - fastening fuel tank

KR50, KR51, SR4-2, Duo 4/2
CatalogueNo.: 4

Strainer for filler neck A60 TGL 13823

CatalogueNo.: 5

Cork- Fuel tank filler cap gasket, caliber 60mm

CatalogueNo.: 6

Filler cap chromed Ø40

CatalogueNo.: 6

Filler cap E60 - model c - polished Alu - embossing: IFA - Six Days 1964 silber vase

CatalogueNo.: 6

Filler cap with lock, chromed, Ø40 - S50, S51, SR50, KR51/1, KR51/2, SR4-2, SR4-4

CatalogueNo.: 6

Filler cap with Logo Simosn, - matt Aluminium

CatalogueNo.: 6

Filler cap with Logo Simson, - Polished Aluminium

CatalogueNo.: 6

Filler cap, Ø60mm, lockable, MZ ETZ, chromed, highly polished

CatalogueNo.: 6

Filler cap, Ø60mm, MZ ETZ, chromed, highly polished

CatalogueNo.: 6

Fuel tank cap, complete with lock

CatalogueNo.: 6

Fuel tank filler cap gasket ø 60 mm

CatalogueNo.: 6

Fuel tank filler cap gasket ø 60 mm - 2mm thickness, NBR

CatalogueNo.: 6

Fuel tank filler cap gasket ø 60 mm - 3mm thickness, NBR

CatalogueNo.: 6

Fuel tank protection ring - Felt - grey for 60mm filler cap

CatalogueNo.: 6

Fuel tank protection ring - Felt - white for 60mm filler cap

CatalogueNo.: 6

Fuel tank protection ring - foam rubber - orange - for 60mm filler cap

CatalogueNo.: 6

Fuel tank protection ring foam rubber black for 60mm filler cap

CatalogueNo.: 6

fuel tank sealing (degreasing, derusting, inner coating) up to 10liters,

takes about 6-8 weeks time
CatalogueNo.: 6

Fuel tank sealing (degreasing, derusting, inner coating) up to 20liters,

takes about 6-8 weeks time
CatalogueNo.: 6

Fuel hose PVC (8x14)

BK, RT125/3,Berlin, ES 175/250/300
CatalogueNo.: 7

Fuel hose PVC D=7,0mm (7x10,5)

BK, RT125/3,Berlin, ES 175/250/300
CatalogueNo.: 7

Fuel hose, NAFTREX B, textil braided, inner liner, NBR Ø7,0mm x 2,5 wall thickness (AD12mm) 1 meter

BK, RT125/3, Berlin, ES 175/250/300
CatalogueNo.: 7

Spring clip - clamping range: 9,8 - 10,4 mm - wire thickness: 1,2 mm - great for backup of fuel hose

CatalogueNo.: 7

Spring clip Ø11,3

CatalogueNo.: 7

Adhesive foil Simson Habicht SET 2x fuel tank + 2x frame

CatalogueNo.: 8

Fuel filter, solid metall, outer caliber 28mm, connection 6mm, SIMSON

CatalogueNo.: 9

Fuel hose 0,3m, Ø 5mm SIMSON

CatalogueNo.: 9

Fuel hose 0,3m, Ø 5mm SIMSON

CatalogueNo.: 9

Fuel hose 10 meter bundle - Ø5x8.2 mm

CatalogueNo.: 9

Fuel hose 25 meter bundle - Ø5x8.2 mm

CatalogueNo.: 9

Fuel hose 5 meter bundle - Ø5x8.2 mm

CatalogueNo.: 9

Fuel hose 50 meter bundle - Ø5x8.2 mm

CatalogueNo.: 9

Fuel hose Ø 5mm 1m

CatalogueNo.: 9

Fuel hose Ø 5mm 1m

CatalogueNo.: 9

Gasoline filter (brass filter) small, 1. quality

Habicht, KR50, Lastendreirad SD50, MOKICK S50, MOKICK S51, MOKICK S53, MOKICK S70, MOKICK S83, Moped SR2, ROLLER SR50, ROLLER SR80, Schwalbe KR 51, Spatz, Sperber, Star
CatalogueNo.: 9

Gasoline filter, small

Habicht, KR50, Lastendreirad SD50, MOKICK S50, MOKICK S51, MOKICK S53, MOKICK S70, MOKICK S83, Moped SR2, ROLLER SR50, ROLLER SR80, Schwalbe KR51, Spatz, Sperber, Star
CatalogueNo.: 9

Spring clip - clamping range 7,8 - 8,3 mm - wire thickness 1,0mm - ideal for securing fuel hose, oil hose etc.

CatalogueNo.: 9

Fibre washer C10,5x15x1 TGL 0-7603-Vf, for petrol tap Simson & MZ

CatalogueNo.: 10

Gasket ring 10,3x13,3 for float needle valve

CatalogueNo.: 10

Connecting nut - M16x1 for petrol tap (right-and left winded) - brass - DIN 73376 - old version - MZ + SIMSON

CatalogueNo.: 11

Connecting nut - M16x1 for petrol tap (right-and left winded) - steel chromed - DIN 73376 MZ + SIMSON

CatalogueNo.: 11

Connecting nut M16x1 for petrol tap (right-and left winded), SR4-1, KR51/1, Star

CatalogueNo.: 11

Connecting nut M16x1 for petrol tap, SR4-1, KR51/1, Star

The parts have been sandblasted, galvanized and zinc-coated, yellow.
Attention – example picture, you will not get the part on display!
CatalogueNo.: 11

Petrol tap EHR complete 12l/h Sperber SR4-3, Habicht SR4-4,TR150, BK 350, fits MZ ES and ETS Types

6,5mm socket for petrol pipe
CatalogueNo.: 12

Riser pipe - plastic - fuel tap

CatalogueNo.: 13

Riser pipe for fuel valve, SIMSON fuel valves

Attention – sample image, you will not get the parts on display!
CatalogueNo.: 13

Top screen for petrol tap 12x10x70, brass mesh

CatalogueNo.: 13

Membrane for petrol tap (GDR) 4-holes - petrol resistant, for petrol tap with water trap SR50,KR51, MZ

SR50,KR51, MZ
CatalogueNo.: 15

Petrol tap lever

Attention – sample image, you will not get the parts on display!
CatalogueNo.: 16

Spring plate for pertol tap lever

The parts have been sandblasted, galvanized and zinc-coated, yellow.
Attention – example picture, you will not get the part on display!
CatalogueNo.: 17

Spring plate for petrol tap - spring plate SIMSON with watertrap

CatalogueNo.: 17

Spring plate for petrol tap - Ø 15 mm, black galvanized

CatalogueNo.: 17

Fillister head screw M3,5x6 KR51, KR50 DIN 84

CatalogueNo.: 18

Portafilter EHR with filter, for petrol tap, for 12955, 10038, 21384

DUO/2 from chassis no 17195
CatalogueNo.: 19

Joint washer for petrol tap case

CatalogueNo.: 20

Petrol tap case for petrol tap, clear

Attention – sample image, you will not get the parts on display!
CatalogueNo.: 21

Petrol tap case for petrol tap, clear, Simson with watertrap

CatalogueNo.: 21

Petrol tap case for petrol tap, grey

Attention – sample image, you will not get the parts on display!
CatalogueNo.: 21

Tool bag incl. tools, 10 pieces - with distance gauge 0,35mm

CatalogueNo.: 22

Tool bag SET (10pcs) packed - Simson - tool kit

Set consits of :
1x tool bag
3x open-end wrench (WAF: 8, 9, 10, 13, 17, 19)
1x spark plug wrench B
1x feeler gauges(distance gauge) 0,4mm for spark plug and breaker contact(handy: with bore such as for key ring)
2x tire iron
1x C-wrench for elbow nut SIMSON
1x Screwdriver straight
CatalogueNo.: 22

Tool bag (empty)

CatalogueNo.: 23

Box for tyre repair

Repair kit TT10 moped, motorcycle, bicycle Tip Top
Little box for tyre repair
CatalogueNo.: 25

Double open-ended spanner key-width 17x19, Chrome vanadium steel

CatalogueNo.: 26

Double ended wrench 10x13 - Simson Moped / Mokick / Scooter

CatalogueNo.: 27

Double open ended spanner 10x13 mm, bent + galvanized - SR50, SR80

Belongs to the scooter's tool bag/on-board tools and makes working on the carburettor much easier - old stock, newly galvanized!
CatalogueNo.: 27

Double open-ended spanner key-width 10x13 - chromed, Chrome-Vanadium-Steel

CatalogueNo.: 27

Double open-ended spanner key-width 8x9 - chromed, Chrome-Vanadium-Steel

CatalogueNo.: 28

C-spanner for union nut for exhaust manifold fastening, spanner 12 and ring spanner 11 integrated - Simson Moped / Mokick / Scooter

CatalogueNo.: 29

Spark plug wrench 21, 19, 17, 13, 10

CatalogueNo.: 30

Spark plug wrench B14x70, with toggle

CatalogueNo.: 30

Spark plug wrench B14x75

CatalogueNo.: 30

Tyre lever 250mm, chromed - heavy duty

CatalogueNo.: 33

Tyre lever A TGL 39442

CatalogueNo.: 33

Screwdriver S50, SR4-1, KR51/1, Star

CatalogueNo.: 34

Setting gauge 0,4mm

CatalogueNo.: 36