ABIL clutch cover gasket 0,50 mm - S50, KR51/1, Duo 4/1

ABIL cylinder base gasket S50, KR51/1, SR4-2 - for M53-engine

ADDINOL HLP46, hydraulic oil

DUO, Schwalbe semi-automatic oil (ISO SAE 46), 4 l canister

Adhesive foil DUO 4/1

Alternator cover - old version - Simson engine M53 fan-cooled - SR4-2, KR51, Duo - speedometer drive not assembeld - blind hole support for brake bowdencable

Alternator cover - old version - Simson engine M53 fan-cooled - SR4-2, KR51, Duo - speedometer drive not assembeld - thread support for brake bowdencableug

Assembling device for clutch Hycomat KR51/1S, Duo 4/1

Base plate 8307.3/3-100 Duo

Base plate S50 (Abutment starter cable) Duo 4/2

Bearing plate Duo 4/1, KR51/1S

Bearing rubbers SET SR2E, KR50, KR51, Star, DUO4/1

Bowdencable grey handlebar DUO (Made in Germany)

2360x1660x480

Bowdencable, (grey) gear shift cable (long) DUO (Made in Germany)

1335x1140x167

Bowdencable, (grey) gear shift cable (short) DUO ( Made in Germany )

1185x990x167

Bowdencable, gear shift cable (long) DUO ( Made in Germany )

1335x1140x167

Bowdencable, gear shift cable (long) - grey - Duo 4/2

Bowdencable, gear shift cable (short) DUO ( Made in Germany )

1185x990x167

Bowdencable, gear shift cable - black - Duo 4/2

Bowdencable, gear shift cable - black - Duo 4/2

Bowdencable, gear shift cable - grey - Duo 4/2

Bowdencable, handlebar DUO ( Made in Germany )

2360x1660x480

Bushing for output shaft

Carrier new KR51/1, Star, S50, Duo 4/1

Carrier new KR51/1, Star, S50, Duo 4/1

Clutch cover

Original - remaining stock

Clutch cover KR51/1S, DUO semi automatic

Attention – sample image, you will not get the parts on display!

Clutch drum Duo 4/1, KR51/1S

Clutch gear Duo 4/1, KR51/1S

Clutch shaft KR51/1S, DUO4/1 - KR51/1S, DUO4/1 - M53 with automatic clutch

Complete reconditioning of your crankshaft S50, KR51/1, Star, Duo 4/1

The price refers to the refurbishment of your crankshaft. Processing time approx. 2 - 3 weeks.

Crankshaft complete for exchange S50, KR51/1, Star, Duo 4/1, refurbished

The prize refers to a refurbished crankshaft, plus 30,- deposit.

Crankshaft, complete new - S50, KR51/1, Star, Duo 4/1

Cylinder base gasket

S50, KR51/1, Star, Duo 4/1, SR4-2

Cylinder cover (cylinder head) with rubber bearings 63ccm Ø45 - KR51/1, SR4-2, Duo 4/1

Cylinder cover (cylinder head) with rubber bearings - KR51/1, SR4-2, Duo 4/1

Cylinder flange, intermediate flange (for BVF-carburetor 16N) connection piece cylinder-carburetor

Schwalbe KR51/1, SR4-2 Star, Duo 4/1

Cylinder flange, intermediate flange (for BVF-carburetor 16N) Schwalbe KR51/1, SR4-2 Star, Duo 4/1 - connection piece cylinder-carburetor

Attention - sample picture, you will not get the part on display!

Cylinder head - race cylinder head on rubber bearings - 63ccm - ø45mm - possible densification: 10:1 - KR51/1, SR4-2, Duo 4/1

Disc washer 15x28x1,2 KR51/1, Star, S50, Duo 4/1

Disc washer A10,5-ST-A4K (DIN 134) - 10,5x22x2,5

Dynamo cover - speedometer drive not mounted - without support for brake Bowden cable

Dynamo cover - speedometer drive not mounted - without support for brake Bowden cable

Attention – sample image, you will not get the parts on display!

Fanwheel for Schwalbe KR51/1, Star, Duo 4/1 Aluminium

Attention – sample image, you will not get the parts on display!

Fanwheel, PVC for Schwalbe KR51/1, Star, Duo 4/1

Festoon bulb 12V 3W Narva

Festoon bulb E 6V 3W SV7, Duo 4/2

Fixing plate Duo 4/1, KR51/1S

Fly wheel primary ignition SLPZ 8307.3/3 complete - alternator (Rotor + Stator) - contact breaker ignition - 6V 25/18W Bilux - DUO 4

Galvanized inner sleeve, for front and rear swing arm - Ø11x15x32

KR50, KR51, SR4-1, SR4 -2, SR4 -3, SR4 -4, DUO

Gasket for clutch cover

S50, KR51/1, Star, Duo 4/1

Gasket for clutch cover

S50, KR51/1, Star, Duo 4/1

Gasket for clutch cover

S50, KR51/1, Star, Duo 4/1

Gasket for sealing cap S50 (Material Abil)

Gasket for sealing cap S50, KR51/1, Star, Duo 4/1

Gasket for sealing cap S50, KR51/1, Star, Duo 4/1

Gearchange shaft KR51/1, Star, S50, Duo 4/1

Gearchange shaft KR51/1, Star, S50, Duo 4/1

Half shell, - for M53-engine - KR51/1, Duo 4/1, SR4-1, SR4-2

The parts have been sandblasted, galvanized and zinc-coated, yellow.
Attention ? example picture, you will not get the part on display!

Half shell, chromed for M53 engine KR51/1, Duo 4/1, SR4-1, SR4-2

Half shell, glavanized - for M53-engine - KR51/1, Duo 4/1, SR4-1, SR4-2

Helical gear for speedometer drive 14 teeth - DUO 4/1

Inner sleeve KR51/1, Star, Duo 4/1, SR4-1, SR4-2

Inner sleeve, for front and rear swing arm

KR50, KR51, SR4-1, SR4 -2, SR4 -3, SR4 -4, DUO

Interlock plate KR51/1, Star, S50, Duo 4/1

Interlock plate KR51/1, Star, S50, Duo 4/1

Intermediate tube - 8,1x11,3x80,8mm - for rear engine mounting for Simson M53 + M54-engines

Lock washer

KR51/1, Star, S50, Duo 4/1

Lock washer

KR51/1, Star, S50, Duo 4/1

Mini festoon bulb 12V 3W SV7,5-26 - Length 28mm

Oil baffle KR51/1, Star, S50, Duo 4/1

Oil drain plug with magnetic seperator M18x1,5 WAF 17

MZ ES, ETS, TS, ETZ

P.U. 04L Stud bolt cylinder for engine series M52-M54 - M6x130 mm

P.U. 36 spokes - M3,5-140 mm - chromed - specially for 1,85x16" wheel rim

P.U. 36 spokes - M3,5-140 mm - stainless steel - specially for 1,85x16" wheel rim

P.U. 36L spokes M3,5-143,5 mm - black

P.U. 36L spokes M3,5-143,5 mm - blue

P.U. 36L spokes M3,5-143,5 mm - blue, TiN-coating

P.U. 36L spokes M3,5-143,5 mm - chromed

P.U. 36L spokes M3,5-143,5 mm - gold

P.U. 36L spokes M3,5-143,5 mm - gold, TiN-coating

P.U. 36L spokes M3,5-143,5 mm - red

P.U. 36L spokes M3,5-143,5 mm - stainless steel

P.U. 4L fitting sleeve for engine case - KR51/1, S50, Duo 4/1

Pair polyamid bushings - swinging arm bearing - for KR50, KR51, SR4-1, SR4-2, SR4-3, SR4-4, DUO

Pair upper protection sleeves, chromed, for short hydraulic suspension strut KR51, SR4-2, -3, -4 , Duo

Pipe section (wheel hub) S50, S51,SR50, KR51, SR4-1, SR4-2

Ratchet segment KR51/1, Star, S50, Duo 4/1

Retaining ring - speedometer drive on alternator cover - KR51-1, SR4-2, -3, -4, S50, DUO

Ring (small for clutch) Duo 4/1, KR51/1S

Ring for clutch DUO

Rubber bushing Ø19.6x8x13,5 - for front engine mounting, SR50, SR80, swinging arm for DUO, for shock absorbers and foot brake lever Schwalbe KR51

Rubber disc ø 14x22x5 - for front mudguard

Duo 4/1, SR4-2, SR4-4, SR4-3, KR51

Rubber sleeve - front engine mount - SR50,SR80, SR4-2, KR51/1, swinging arm - DUO, mech./ hydraul. damper unit

Safety lock (MZA) Duo

Sealing ring A18x22x1,5 TGL 0-7603-Aluminium

Sealing ring for lighting switch - KR51, Duo 4/2, SR4-2, SR4-3, SR4-4

Sealing washer A18x24, for oil drain

KR51/1, Duo 4/1, ETZ125,150,250,251,250,250/1, TS250,TS250/1

SET polyamid bushings with inner sleeve

KR50, KR51, SR4-1, SR4 -2, SR4 -3, SR4 -4, DUO

SET rear engine mounting - for Simson M53 + M54-engines 1x rear engine mounting, 2x bearing rubber - SR2E, KR50, KR51/1, Star, DUO4/1

SET roller bearing with reinforced sleeve and circlip

- fits without modification
- 2x wheel bearings 62012Z
- 1x reinforced sleeve for hub
- the sleeve has a length of 48.50mm
- 1x circlip 32x1.2

SET Speedometer drive - 5pcs (speedometer pinion, speedometer sprocket and small parts) for 11teeth sprocket Duo 4-1, KR51/1, SR4-2, SR4-3, SR4-4, S50

SET Spokes chromed 143,5 mm for Simson, reinforced from WWS (German quality)

Reinforced spokes M4mm thread instead of M3,5 original. Size of spokes 3,44mm including nipples

SET Spokes chromed M3,5x143,5 mm for Simson, complete with nipples (16")(Cu/Ni/Cr S51,S70,S53,S83, KR51

Set spokes complete with nipples M3,5 - 143,5 (16") stainless steel (polished) S51,S70,S53,S83

SET Spokes nickel plated M3,5x143,5 mm for Simson

Fitting nipples order no: 19843

Shaft for gear switching unit

Shaft for gear switching unit

Shaft seals - SET - NJK - Engine complete, FPM - Viton - brown - S50, KR51/1

2x 10294E 17x28x7 Viton
1x 10295E 20x30x7 Viton
2x 10299E 22x47x7 Viton

Sliding bar complete KR51/1, Star, Duo 4/1

Sliding gear for 3rd gear KR51/1, Star, S50, Duo 4/1

Sliding gear KR51/1, Star, S50, Duo 4/1

Socket head screw M6x75 - 8.8-A4K DIN 912

Spacer plate 2,5mm clutch cover for clutch conversion S50, KR51/1, SR4-

- Attention: you need 2.5mm longer screws
- Plate is required e.g. when converting clutch types M500 to M53/54
- 2x clutch cover gaskets are required
- Material: aluminum

Spoke nickel plated M3,5x143,5 mm for Simson

Fiting nipples order no: 19843

Spokes set with nipples +3mm (each 36 pieces) - M3,5- 143,5mm - chromed - for 16" - wheel rims

Spokes set with nipples +3mm (each 36 pieces) - M3,5- 143,5mm - stainless steel - for 16" - wheel rims

Spring on output shaft

KR51/1, Star, S50, Duo 4/1, KR50, SR4-1, SR4-2

Spring to contact screw, compression screw 0,5x5,5x5,5 - TGL 18395, to idle contact - engine M54

Sprocket for 3rd gear KR51/1, Star, S50, Duo 4/1

Stud bolt - repairs (tension rod, stud bolt) - M6/M8 thread - Made in Germany - for uprooted thread in engine housing - for engine series M51 / M53 / M54

Support disk KR51/1, Star, SR4-2, Duo 4/2

Switch bracket KR51/1, Star, S50, Duo 4/1

Switch bracket KR51/1, Star, S50, Duo 4/1

Switch spring (flexible spring) S50, KR51/1, Star, Duo 4/2

Switch spring (flexible spring) S50, KR51/1, Star, Duo 4/2

Switch spring for footswitch KR51/1, Star, S50, Duo 4/1

Switching disk Duo 4/1, KR51/1S

Tension bolt Duo 4/1, KR51/1S

Threaded bush - for sliding bar (neutral indicator) - engine M53, M54 - SR4-2, SR4-4, KR51/1, DUO4/1

Threaded bush - for sliding bar (neutral indicator) - engine M54 - SR4-3

Trunnion support - black - for alternator cover / Speedometer drive - KR51-1, SR4-2, -3, -4, S50, DUO

Trunnion support for alternator cover / Speedometer drive - KR51-1, SR4-2, -3, -4, S50, DUO

Upper protection sleeve, plastic, shorter front hydraul.ic suspension strut KR51, SR4-2, -3, -4 , Duo