Engine 50ccm 4-gears - for S51, KR51/2, SR50 - housing nature colour - without ignition and carburetor - for S51, KR51/2, SR50
GTIN/EAN: 4056144175612
availability info per
RT125/1, RT125/2, RT125/3 - G1095/H970
RT125/1, RT125/2, RT125/3 - G1095/H970
SR50/1,SR80/1XG,XC,XGE,XCE
SR4-1, SR4-2, SR4-3, SR4-4
Matching coupling available under MZA 14528-A-S!
Information & technical description, parts list and instructions for adjustment
Information & technical description, parts list and instructions for adjustment
Information & technical description, parts list and instructions for adjustment
Information & technical description, parts list and instructions for adjustment
Information & technical description, parts list and instructions for adjustment
Suitable for 20 mm crank pin / crankshaft - not suitable for 125W + 350, since the crank pin there is 17 mm!
Brand: PLASTANZA Material ABIL
Version with GDR fittings to fix the choke lever on the side
1x roll 10 ball bearings. The package contains 40 bearings
Attention – sample image, you will not get the parts on display!
For the years of construction 1954 - 1959.
5-part cable thickness 1.5 mm²
Manufactured according to original templates.
With temperature-resistant black insulating tube and cable eyelets.
A graphic representation and a circuit diagram for a quick and safe laying of the cables is included.
old fashion, ripped longitudinally
The price refers to the drilling, honing and chamfering of channels on your cylinder, processing time approx. 2-3 weeks.
The price refers to drilling, honing, chamfering channels in exchange + 40 deposit
Original remainder.
Some of the contacts were painted at the factory to prevent corrosion, those have to be ground down before using
Refurbishment of your old part, processing time approx. 4-5 weeks.
135/145mm flat glass
for lamp ring
Enduro, ETZ 125,150,250,251/301/MZ 500 R, NR, VR ES/ETS 125/1, 150/1
MZ 500 R, VR, NR, C, V
MZ 500 C
Complete new version with 3,2mm (See pictures)
Layshaft
1x 31-41.012 Layshaft bush
1x 94-02.406 Needle roller bearing 11553
1x 94-37.110 Plain washer 15x0,5
1x 31-46.014 Gear on layshaft (3rd gear)
3x 94-42.374 Circlip 20X1,2 TGL 16363
1x 31-46.012 Layshaft
1x 31-46.016 Sliding gear (3rd gear)
1x 31-46.018 Sprocket - 2nd gear
1x 31-46.023 Check plate
1x 31-46.020 Sliding gear (1st and 2nd gear)
1x 31-46.022 Gear wheel (1st gear)
1x 93-93.106 DKF Groove ball bearing 6201 TNG C3
Clutchshaft
1x 93-93.147 DKF roller bearing 6202 TN C3
1x 31-46.002 Clutchshaft
1x 31-46.004 Drive gear for 4th gear
1x 00-03.052 Circlip 20 TGL 16363 reground
1x 31-46.006 Sliding gear 4th and 5th gear
1x 31-46.039 Sealing ring in mainshaft
1x 31-46.007 Mainshaft with bush
1x 93-93.276 DKF roller bearing 6204 TNG P66
1x 11-47.044 Distance sleeve for chain sprockets
1x 31-46.030 Sprocket on transmission 15 teeth
1x 01-47.008 Locking plate for sprocket
1x 94-73.862 Hex nut M20x1,5
Gear switch
1x 31-47.017 Shift drum
1x 31-47.012 Fork gear selector for 1st and 2nd gear
1x 31-47.014 Fork gear selector 3rd gear
1x 31-47.016 Fork gear selector 4th and 5th gear
1x 31-47.020 Guide bolt
3-part cable thickness 1.5 mm²
Main cable harness
Ignition alternator cable harness
Dimmer switch horn button cable Harness
Manufactured according to original templates.
With temperature-resistant black insulating tube and cable lugs.
The cable lugs are soldered and provided with a protective hose.
A circuit diagram for a quick and safe laying of the cables is included.
For years of construction 1954 - 1959.
5-part cable thickness 1.5 mm²
Manufactured according to original templates.
With temperature-resistant grey insulating tube and cable eyelets.
A graphic representation and a circuit diagram for a quick and safe laying of the cables is included.
From year of manufacture 1959.
5-part cable thickness 1.5 mm²
Manufactured according to original templates.
With temperature-resistant GRAY insulating tube and cable lugs.
The cable lugs are soldered and provided with a protective hose.
A graphic representation and a circuit diagram for a quick and safe laying of the cables is included.
For years of construction 1954 - 1959.
5-part cable thickness 1.5 mm²
Manufactured according to original templates.
With temperature-resistant black insulating tube and cable eyelets.
A graphic representation and a circuit diagram for a quick and safe laying of the cables is included.
MZ ES 175, 175/1, 250, 250/1, 300
SKF- brand; both sides sealed.
Brand: PLASTANZA Material ABIL
RT 125/3, RM 150
brand: PLASTANZA / Material ABIL
apx. 1300mm
ES/ETS 175/250
18x M3,5x215mm
18x M3,5x225mm
36x nipples M3,5
18x M3,5x220mm
18x M3,5x225mm
36x nipples M3,5
Reproduction! Much better material than than normally used! These chain guards are a mixture between PVC and synthetical rubber and not pure PVC as usual. These chain guards are much more durable than the ones made only from PVC but, unfortunately, much more expensive than the PVC- ones. For this price you´ll get a pair (2 pieces). The length, not loaded, is app. 40cm. ATTENTION and take care: In cause of included solvents, resolving the material, never take chain spray but normal bearing grease as required from MZ when lubricating the chain. Guarantee will be lost in case of wrong lubrication.
is required to fasten the seat rubber on the metal base plate
RT 125/ 1; ../ 2 : until chassis number: 5002388
1x Cover slide for ignition switch cover (30-34.059)
1x Cover plate top (30-34.060)
1x Cover plate bottom (30-34.061)
Semi synth 2-stroke oil for mixture and separation lubrication til 1:50, low-smoke-visibly reduced smoke development, fewer deposits 1L can
for 5th transmission 12mm shaft
ETZ 250,251/301 TS 250/1
1x12,7x7,75x118 Original quality
MZ 500 R, NR
transmission oil API classification GL 3 (specifically for MZ transmission) 1L can
telescopic fork oil for MZ and Simson, 1l
The prize refers to a refurbished crankshaft, an additional 75,- must be paid as a deposit.
Brand: PLASTANZA Material ABIL
The prize refers to the drilling, honing and chamfered edges, an additional 45,- must be paid as a deposit.
2x D0061 Jet needle / partial load 1
2x D2060-67 Jet holder 67
2x D1091-95 main nozzle 95
2x D0072 carburet needle
2x D2045-30 ilde jet 30
4x D0050 sealing ring 6,5x10x0,5
2x D0054 sealing ring 18x22x1
2x D2059 gasket for insert piece 27mm
2x D0056 sealing ring 12,5x18x1
1x D0066 Jet needle / partial load, Nr.: 3
1x D2057-70 Jet holder 70
1x D1091-95 Main Jet 95
1x D2045-45 Pilot jet 45
1x D2382 Float needle big
1x D2253 Gasket for Insertion AWO/S, ES, IWL 24-27mm
1x D0050 Seal ring 6,5x10x0,5
1x D0051 Seal ring 18x23x1
1x D0052 Seal ring 20x26x1
1x D0054 Seal ring 18x22x1
Our own repro, German production.
bei ETZ 150 EM 150.2 9kW
Original MMB
Attention – sample image, you will not get the parts on display!
Attention – sample image, you will not get the parts on display!
for telescopic front fork 32mm Sealed fuel tank