Packing ring for wheel bearing
RT 125/ 1; ../ 2 : from chassis - nr.: 5002389
RT 125/ 1; ../ 2 : from chassis - nr.: 5002389
NEW master brake cxlinder incl. lever and brake light switch.
Cannot be used with the original brake line (no counter cone)
Only with brake line (DG1) and hollow screw (11044-)
with orginal pattern imprint
reproduction
Until now you needed a special frame of those models to mount the seats on your vehicle. We designed universal tubes, in accordance to the mounting tubes of ETZ, for TS 250 and ETZ 251. With these specially designed tubes you can now mount the single seats of ETZ 250 on TS 250, TS 250/1 and ETZ 251.
SET, 4 pieces
Material is natural rubber, so no PVC like the other available reproductions.
Rubber is more elastic and more durable than PVC.
TS 250 ETZ 250
Set holds 4 pcs
for 35mm telescopic fork, price for 1 piece MZ 500 S
1x float chamber for 16N 19N 21N with main jet switch function
1x jet holder with switch function for float chamber with switch function 215
1x gasket for floating chamber black TPU for 16N 19N 21N
MZ 500 R, NR, VR
Brand GLÜWO Germany
ETZ 125/150/250/251/301
ETZ 250,251/301 TS 250,250/1
For Mfa SL1 picture number: 8, 11, 19, 22 and 26
2x 10294E 17x28x7 Viton
1x 10295E 20x30x7 Viton
2x 10299E 22x47x7 Viton
Simson+MZ
ETZ125, ETZ150, ETZ250, ETZ251, ETZ301, TS250, TS250/1
10147 - Rubber for Kickstart black
10119 - Pedal rubber
10152 - Pedal rubber for gear change lever
10041 - Handlebar grip, waffle pattern, for 22mm handle bar
10042 - Cover for twistgrip, waffle pattern - for twist grip tube 28mm
ETZ 250,251/301 TS 250,250/1
MZ 500 R, NR
Attention – sample image, you will not get the parts on display!
ETZ125,150,250,251,301
MZ 500 R, NR, VR, V
Attention – sample image, you will not get the parts on display!
Attention – sample image, you will not get the parts on display!
Attention – sample image, you will not get the parts on display!
Attention – sample image, you will not get the parts on display! MZ 500 R, NR, VR, C, V
For KR 51 til const. year 1978 - length: 300mm - hydraulic damping!
Glüwo Germany
Glüwo Germany
Glüwo Germany
S51,S70,S53,S83
Reproduction, has to be refinished!
Threaded end ˜ 2 d, total length 30 mm, carburettor flange
S50, S51, S70, Star
(For S51 - alternator cover of scooters with electrical starter tablet 10)
old fashion, ripped longitudinally
Torpedo fuse
This tyre pump includes the plug in hose and folding clamp, just like the original. Even looks like the original. Length approx. 345mm.
Branded lamp Glüwo Germany
Brand: PLASTANZA / Material ABIL
Possible storage marks
Glüwo Germany
Only with steering lock: 96-21.071 suitable or steering lock S50/S51 must be mechanical turned
glass fuse
Torpedo fuse
Glüwo Germany
S51E, S70E
MZ 500 C
(for S51 ball bearing drive shaft)
ETZ 250,251/301
S50, S51, S53
Made in Germany!
Two stroke oil for mixture and separation lubrication til 1:50, 5l Canister
brand lamp Glüwo Germany
brand name product
ETZ125, ETZ150, TS250, TS250/1, ETS250
Brand lamp Gluewo Germany
Glüwo Germany
GLÜWO Germany
Spare part for hub 31513, with 10mm Ø axle
6,8x20,7 mm
SKF- brand
MZ 500 all
Glüwo Germany
MZ 500 R NR
Habicht, KR50, Lastendreirad SD50, MOKICK S50, MOKICK S51, MOKICK S53, MOKICK S70, MOKICK S83, Moped SR2, ROLLER SR50, ROLLER SR80, Schwalbe KR 51, Spatz, Sperber, Star
for 5th transmission 10mm shaft
SR50, SR80
for all S51, S70, S53, S83, SR50, SR80, KR51/2 - size: 0,8mm - special production!
brand product GLÜWO, germany
(for S51 left housing half, ball bearing for clutch shaft)
S50, KR51/1, Star, Duo 4/1
MZ 500 NR VR C V S
MZ 500 C
for wheel hubs with flat brake discs
ETZ 125,150,250,251/301
Brand: GLÜWO Germany
for nameplate fastening
ETZ 250,251/301
ETZ250, 251, 301
S51,S70,S53,S83
DUO/2 from chassis no 17195
(for S51 - right housing half, crank shaft bearing)
S51,SR50, SR2, SR4-1
MZ 500 R, NR
(for S51 ball bearing drive shaft)
(for S51 ball bearing drive shaft)
SIMSON UNIVERSAL - S51, S53, S61, S70, SR 50, SR80, KR51/2
ES 175/ 1 from chassis number 3056177
ES 250/ 1 from chassis number 1187185
ES 300 from chassis number 1503201
S50, KR51/1, Star, Duo 4/1, SR4-2
S51,SR50
German produce - 2nd choice with storage marks - can be cleaned with cleaning agents
SR1, SR2, SR2E, KR50, SR4-1
Electrolyte is bound in a fiberglass fleece - acid cannot leak - fully sealed. Maintenance free. Outstanding cycle stability.
We are obliged to charge the purchaser a deposit of €7,50, if no old battery is returned. A refund is provided for a battery, if a battery is returned to a recycling center or else. To this you will receive a form, along with the shipment of the battery, which has to be signed and stamped.
TS125, TS150, ETS
SR4-1, SR4-2 , SR4-3, SR4-4
The prize refers to the refurbishment of your own cylinder/head and the grinding, drilling and chamfered edges.
If no replacment part is delivered or if the cylinder/head is defect, an additional 95,- for the cylinder and 35,- for the cylinder head must be paid as a deposit.
gaskets:
1x 29-42.305 cylinder head gasket 0,2mm
1x 29-42.304 cylinder base gasket
2x 15147-00M insulating flange gasket
SKF-Brand bearing
ETZ 250,251/301
The prize refers to the refurbishment of your own cylinder/head and the grinding, drilling and chamfered edges.
If no replacment part is delivered or if the cylinder/head is defect, an additional 95,- for the cylinder and 35,- for the cylinder head must be paid as a deposit.
gaskets:
1x 29-42.305 cylinder head gasket 0,2mm
1x 29-42.304 cylinder base gasket
2x 15147-00M insulating flange gasket
ETZ 125/150,
Screw + nut + flat washer
ES 125, 150til ID no 5112611/5517985
- Trailer coupling fitting for IWL Wiesel /Berlin Scooter in connection with Pav 40 or 41 trailer
- German production
- Coupling must be accepted individually and noted in paperwork
2x trims and 3x bracktes with c(disc washers, nuts)
Trim and bracket are made of Aluminium, polished
ES 125, 150til ID no 5112611/5517985
The prize refers to a refurbished crankshaft, an additional 195,- must be paid as a deposit.
Attention – sample image, you will not get the parts on display!
Attention – sample image, you will not get the parts on display!
Rotary head lamp switch
Attention – sample image, you will not get the parts on display!
SR1, SR2, SR2E, KR50, SR4-1
brand: PLASTANZA / Material ABIL
1x D0066 Jet needle / partial load, Nr.: 3
1x D2057-70 Jet holder 70
1x D1091-115 Main Jet 115
1x D2045-45 Pilot jet 45
1x D2382 Float needle big
1x D2253 Gasket for Insertion AWO/S, ES, IWL 24-27mm
1x D0050 Seal ring 6,5x10x0,5
1x D0051 Seal ring 18x23x1
1x D0052 Seal ring 20x26x1
1x D0054 Seal ring 18x22x1
Original MZ ETZ 301 cylinder with 83mm cylinder liner
does not fit on the housing EM250 (80mm cylinder liner)
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
TS 250, exchange cylinder regenerated, incl. piston, gudgeon pin, piston rings and circlips
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
4-speed - bottom of exhaust port has indentation
MZ 500 ETZ 125,150,250,251/301
ETZ 125,150,250 MZ 500 R
ETZ 250,251/301 TS 250,250/1 ES 175/2,250/2
A1267x1122x127,5 - TS125, TS150
With window for license plate light. Basis of original drawings with labels.
Simson KR51, SR4-1, SR4-2, SR4-3, SR4-4, ES, TS
-for one scooter you need 2 rubber sleeve springs
-41mm outer diameter
-sleeve springs are pressed from left and right into the frame
The prize refers to the drilling, honing, chamfered edges and renewing of threading, an additional 95,- must be paid as a deposit.
The prize refers to the drilling, honing and chamfered edges, an additional 245,- must be paid as a deposit.
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
5 speed - bottom of exhaust port is raised
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
5 speed - bottom of exhaust port is raised
IWL plaque, in brass characterised and highlighted in colour Usage: Campi
IWL plaque, in brass characterised and highlighted in colour Usage: on head lamp panel, Wiesel and Berlin
4-speed - bottom of exhaust port has indentation
The prize refers to the drilling, honing and chamfered edges, an additional 95,- must be paid as a deposit.
4-speed - bottom of exhaust port has indentation
very good used condition / workshop sign fire extinguisher 4 small holes at the corners are available dimensions approx. 30x21cm